鋁板壓型加工時是鋁卷在壓型設備（彩鋼瓦設備）上面加工，類似于滾邊、折邊加工工藝，將鋁板加工為各種型號的壓型鋁板，主要用于屋面、電廠脫硫、防腐保溫等行業中。
Aluminum sheet is processed by aluminum roll in pressure type equipment (color steel tile equipment). It is similar to edge rolling and folding processing technology. Aluminum plate is processed into various types of pressure aluminum plate. It is mainly used in roofing, power plant desulfurization, anticorrosion and heat preservation and other industries.
鋁板壓型加工的常見規格：通常鋁板都是壓型YX35-125-750型號較為常用，尤其是電廠防腐保溫工程、煙道脫硫防腐工程較為常用，厚度以0.5-1.2mm厚度居多，材質常常為1060、3003、3A21、LF21等材質。上海呂盟鋁業有限公司常年提供優良壓型鋁板，瓦楞鋁板，鋁瓦等產品，歡迎來電咨詢。
The common specifications of aluminum sheet pressing processing: usually the aluminum plate is the most commonly used type YX35-125-750 type, especially in the power plant anticorrosion and insulation engineering, flue gas desulfurization and anticorrosion engineering is the most commonly used, the thickness is more than 0.5-1.2mm thickness, material is often 1060, 3003, 3A21, LF21 and other materials. Shanghai Lun Meng aluminum products Co., Ltd. provides high-quality aluminum sheet, corrugated aluminum plate, aluminum tile and other products all the year round. Welcome to inquire.
第二種常見的鋁板壓型加工型號為YX23-210-840型號，常常擁有屋面和墻面方面，我們稱為840型壓型鋁板，有時候許多工廠和車間的屋面采用彩涂鋁卷進行壓型常常選擇840型號的壓型鋁板。

Second kinds of common aluminum plate compression processing model for YX23-210-840 model, often have roof and wall aspects, we call the type 840 type of pressure aluminum plate, sometimes many factories and workshop roofs with color coated aluminum rolls for pressure type often select the 840 type of pressure aluminum plate.
鋁板在壓型加工過程中要注意壓型鋁板的長度和厚度，避免因為設備問題導致的壓型鋁板邊緣部位因為磨損導致的毛刺。在鋁板的壓型加工以后包裝的適合也要注意防水防潮。同時在選擇鋁板材質方面建議不要選擇硬度太高的產品，通常可選擇H24或者H16狀態的鋁卷作為鋁板壓型加工的原料，如果鋁板硬度太高會導致加工過程中斷裂問題。
In the process of pressing, the length and thickness of the aluminum plate should be paid attention to in the process of pressing the aluminum plate, so as to avoid the burr caused by wear because of the equipment problem. When the aluminum sheet is pressed, the packing is also suitable for waterproofing and moisture proofing. At the same time, it is recommended not to choose the products with too high hardness in the material of aluminum plate. The aluminum rolls of H24 or H16 can be selected as raw materials for aluminum sheet pressing. If the hardness of the aluminum plate is too high, it will cause the fracture problem during the process.
壓型加工中常見問題：壓型加工中的問題主要是鋁卷平整度不行，容易跑偏，所以想要壓型過程中不跑偏建議采用拉彎矯處理，校平平整度，就能夠很好的避免鋁板壓型過程中的跑偏。上海呂盟鋁業有限公司常年提供各種優良的壓型鋁板，適合于電力、屋面、設備罐體等各種設備使用，現貨供應厚度0.5毫米、0.6毫米、0.7毫米、0.8毫米、1毫米等各種厚度的壓型鋁板和保溫鋁皮，彩涂氟碳和聚酯壓型鋁板等各種產品。
The common problem in press machining: the main problem in the compression machining is that the flatness of the aluminum coil is not good and easy to run off, so it is suggested to use the tension bending correction and the leveling to avoid the deviation in the process of the aluminum plate pressing. Shanghai Lumeng Aluminum Co., Ltd. provides all kinds of high quality aluminum plate for all kinds of equipment. It is suitable for all kinds of equipment, such as electric power, roofing, equipment tank and so on. The spot supply is 0.5 millimeter, 0.6 millimeter, 0.7 millimeter, 0.8 millimeter, 1 millimeter and other thickness of pressure type aluminum plate and insulating aluminum skin, color coating fluorocarbon and polyester press aluminum plate and so on Products.